Friday, August 26, 2011

Kill Mold And Stop It From Returning

The time has come to care for any mold removal circumstances you've discovered in your home. Awaiting the mold to miraculously go away completely won't happen. You'll want to step in with a few of mold removal techniques to eliminate it for good. And in most all cases, it is possible to eliminate the mold on your own with no need to hire an outside expert.

The good news is that there are several ways to kill mold and stop it from returning. To prevent mold from returning to rear its ugly head, it is important that you keep the humidity level in your home low. This is easy to do while on an air conditioning unit or a dehumidifier.

Another technique to prevent mold is to make sure that there is adequate ventilation in your home, especially in the kitchen and in bathrooms. Be sure that your clothes dryer and exhaust fans vent to the outside of your home. Keep your home well-maintained and repair all leaks within the walls, floor and roof at the earliest opportunity. Whenever you paint interior walls, add a mold inhibitor. And, remove any carpets which have been completed saturated with water and can't be dried.


There are numerous fairly simple techniques for getting rid of mold in the mold removal process. Using an over-the-counter cleaning solution works well. It's also possible to build your own solution by mixing together 1 cup of bleach and 8 cups of water. Allow either of these methods to soak for awhile on the moldy area and then use a stiff scrub brush to scour the mold away. If you have mold that has accumulated on paper products such as books and newspapers, a very important thing to do is to throw them away in sealed garbage bags.

Some aspects of your home that have mold could be more difficult to clean. These areas include bathroom fixtures and moldy walls. It will require a little more elbow grease from you to get the entire area covered with cleaning solution and scrubbed clean of mold. It is particularly significant to keep small areas including bathrooms well-ventilated during the mold-removal process. Also, be sure you spot test your cleaning solution on the area before actually using it to the entire mold-covered surface. And one very important thing to remember is NEVER PAINT OVER MOLD! mold abatement continues to grow under paint and detaching the mold later will likely be difficult, if not impossible.

Mold removal is what every homeowner should do continually, not merely when mold appears. It is much simpler to deal with small regions of mold now than to let mold always build-up in moist areas that are often hard to detect. By being diligent to maintain your home in the best way possible, you will lay aside yourself hours of stress later on when dangerous mold continues to be permitted to grow in your "home sweet home".